Click image to view full size image
Pipe internal long reach beam for welding
***Machine application
1. Usage: cylinder internal longitudinal seam welding
2. Application: thickness 5-20mm; length 12000mm; diameter φ530-2500mm; material carbon steel
3. Work piece state: surface smooth, butt gap 1-2mm
4. Work piece surface: No pollution, serious corrosion etc.
***Machine feature
1. Rotator drives work piece walking, welding equipment is fixed; rotator walking speed is controlled by frequency conversion stepless speed regulation, can meet the requirements of welding speed adjustment.
2. Adjustable rotator using screw adjust, the distance between rollers is manual screw adjust, according to welding requirement; make the longitudinal weld in the horizontal position as far as possible.
3. The welding head are respectively provided with 2D mechanical tracking mechanism can reduce the frequent adjustments to welding head due to cylinder placed errors.
4. Welding head is equipped with TV surveillance cameras and convenient in observation.
5. Welding rotator walking start or stop and the welding power supply has the linkage control.
***Machine parameters
***Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.
***Machine application
1. Usage: cylinder internal longitudinal seam welding
2. Application: thickness 5-20mm; length 12000mm; diameter φ530-2500mm; material carbon steel
3. Work piece state: surface smooth, butt gap 1-2mm
4. Work piece surface: No pollution, serious corrosion etc.
***Machine feature
1. Rotator drives work piece walking, welding equipment is fixed; rotator walking speed is controlled by frequency conversion stepless speed regulation, can meet the requirements of welding speed adjustment.
2. Adjustable rotator using screw adjust, the distance between rollers is manual screw adjust, according to welding requirement; make the longitudinal weld in the horizontal position as far as possible.
3. The welding head are respectively provided with 2D mechanical tracking mechanism can reduce the frequent adjustments to welding head due to cylinder placed errors.
4. Welding head is equipped with TV surveillance cameras and convenient in observation.
5. Welding rotator walking start or stop and the welding power supply has the linkage control.
***Machine parameters
| Model | NZF-12000 |
| Effective welding length | 12000mm |
| Beam lifting stroke | 250mm |
| Beam lifting speed | 160mm/min |
***Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.